1.8.4 server crashes on resume (Ubuntu 14.04)

Get help when something crashes.
Posts: 1
Joined: Wed Oct 26, 2016 1:09 am

1.8.4 server crashes on resume (Ubuntu 14.04)

Postby James Chapman » Wed Oct 26, 2016 1:28 am

I am seeing the server crash when resuming after suspend/hibernate on Ubuntu 14.04. Synergy is configured to autostart at boot. I tried two methods: using Dash "Startup Applications" and configuring the Lightdm greeter. Both result in the same behaviour. Synergy will autostart with no problems at boot, but it crashes if the server is resumed after suspend or hibernate.

I am using 1.8.4 with 3 Ubuntu computers, all running 14.04.

greeter-setup-script=/usr/bin/synergys --debug DEBUG2 --name whoosh --enable-crypto --address :24800 -c /etc/synergy.conf

On resume, syslog has the following:-

Code: Select all
Oct 26 08:54:25 whoosh kernel: [  780.169963] Restarting tasks ... done.
Oct 26 08:54:25 whoosh acpid: client 1813[0:0] has disconnected
Oct 26 08:54:25 whoosh Synergy 1.8.4: [2016-10-26T08:54:25] DEBUG2: writef(CALV)
Oct 26 08:54:25 whoosh Synergy 1.8.4: [2016-10-26T08:54:25] DEBUG2: wrote 4 bytes
Oct 26 08:54:25 whoosh Synergy 1.8.4: [2016-10-26T08:54:25] NOTE: client "bobbins" is dead
Oct 26 08:54:25 whoosh Synergy 1.8.4: [2016-10-26T08:54:25] DEBUG2: writing secure socket:0x1dba190
Oct 26 08:54:25 whoosh Synergy 1.8.4: [2016-10-26T08:54:25] ERROR: ssl error occurred (generic failure)
Oct 26 08:54:25 whoosh Synergy 1.8.4: [2016-10-26T08:54:25] ERROR: error:140D00CF:SSL routines:SSL_write:protocol is shutdown
Oct 26 08:54:25 whoosh Synergy 1.8.4: [2016-10-26T08:54:25] DEBUG1: registered event type stopRetry as 48
Oct 26 08:54:25 whoosh Synergy 1.8.4: [2016-10-26T08:54:25] DEBUG1: registered event type disconnected as 49
Oct 26 08:54:25 whoosh anacron[6146]: Anacron 2.3 started on 2016-10-26
Oct 26 08:54:25 whoosh anacron[6146]: Normal exit (0 jobs run)
Oct 26 08:54:25 whoosh acpid: client connected from 1813[0:0]
Oct 26 08:54:25 whoosh acpid: 1 client rule loaded
Oct 26 08:54:25 whoosh anacron[6220]: Anacron 2.3 started on 2016-10-26
Oct 26 08:54:25 whoosh anacron[6220]: Normal exit (0 jobs run)
Oct 26 08:54:26 whoosh kernel: [  781.185805] synergys[5300]: segfault at 2f1 ip 00000000000002f1 sp 00007ffc1efe7118 error 14 in synergys[400000+e0000]
Oct 26 08:54:27 whoosh kernel: [  781.861559] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx


eth1 is the interface on which the server communicates with its clients, but this come up after synergy starts.Could this be the problem?

Return to Crashing

Who is online

Users browsing this forum: Erik Turk and 2 guests