mSedek

losing connection on one side or both

12 posts in this topic

was reading this thread 

 which was unfairly closed with no solution and I cant find any other topic about this.. bought synergy (finally) 2 days ago and get nothing more than headache.. made even fresh install my 2 laptops with LINUX MINT 18.3 sylvia just to find out that the issue still happens.. I would have liked to know about this bug before the purchase, not asking for a refund because I achieve nothing with the little money invested , but asking for a solution to this..

 

Symptoms are , I launch the app in both laptops (both running mint 18.3 xfce) and start working, usually my main laptop on the right side and the other in the left, suddenly and out of nowhere the cursor on the left side computer goes to the middle of the screen and in that moment i know it disconnected, to reconnect i have to move the cursor from the left side to the right and then it start working again.. it  happens so often that it is really annoying, I  dont use mouse, I use the trackpad of the laptops.. im not sue which one is the side getting disconnect or why is this annoying behavior happening.. any ideas?

Share this post


Link to post
Share on other sites

Well... I don't think you have the same issue as the one that was "unfairly closed"; it sounds like your problem has more to do with the system losing track of where the trackpad is. Are there any indications in the system logs of interrupt loss or HID (mouse/trackpad) errors around the time of the occurrence? Check /var/log/syslog and dmesg...

Share this post


Link to post
Share on other sites

  GNU nano 2.5.3                                                    File: /var/log/syslog                                                                                                              

Feb 22 09:02:17 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:17] debug: Saying Hello to core client
Feb 22 09:02:26 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:26] NOTE: server is dead
Feb 22 09:02:26 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:26] debug: Error reading from core client: End of file
Feb 22 09:02:26 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:26] debug: Terminating core client read loop
Feb 22 09:02:26 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:26] WARNING: failed to connect to server: server is not responding
Feb 22 09:02:26 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:26] DEBUG: retry in 1 seconds
Feb 22 09:02:27 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:27] NOTE: connecting to '127.0.0.1': 127.0.0.1:24801
Feb 22 09:02:27 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:27] debug: Saying Hello to core client
Feb 22 09:02:36 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:36] NOTE: server is dead
Feb 22 09:02:36 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:36] debug: Error reading from core client: End of file
Feb 22 09:02:36 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:36] debug: Terminating core client read loop
Feb 22 09:02:36 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:36] WARNING: failed to connect to server: server is not responding
Feb 22 09:02:36 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:36] DEBUG: retry in 1 seconds
Feb 22 09:02:37 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:37] NOTE: connecting to '127.0.0.1': 127.0.0.1:24801
Feb 22 09:02:37 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:37] debug: Saying Hello to core client
Feb 22 09:02:46 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:46] NOTE: server is dead
Feb 22 09:02:46 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:46] debug: Error reading from core client: End of file
Feb 22 09:02:46 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:46] debug: Terminating core client read loop
Feb 22 09:02:46 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:46] WARNING: failed to connect to server: server is not responding
Feb 22 09:02:46 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:46] DEBUG: retry in 1 seconds
Feb 22 09:02:47 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:47] NOTE: connecting to '127.0.0.1': 127.0.0.1:24801
Feb 22 09:02:48 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:48] debug: Saying Hello to core client
Feb 22 09:02:57 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:57] NOTE: server is dead
Feb 22 09:02:57 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:57] debug: Error reading from core client: End of file
Feb 22 09:02:57 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:57] debug: Terminating core client read loop
Feb 22 09:02:57 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:57] WARNING: failed to connect to server: server is not responding
Feb 22 09:02:57 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:57] DEBUG: retry in 1 seconds
Feb 22 09:02:58 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:02:58] NOTE: connecting to '127.0.0.1': 127.0.0.1:24801
Feb 22 09:02:58 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:02:58] debug: Saying Hello to core client
Feb 22 09:03:07 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:07] NOTE: server is dead
Feb 22 09:03:07 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:03:07] debug: Error reading from core client: End of file
Feb 22 09:03:07 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:03:07] debug: Terminating core client read loop
Feb 22 09:03:07 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:07] WARNING: failed to connect to server: server is not responding
Feb 22 09:03:07 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:07] DEBUG: retry in 1 seconds
Feb 22 09:03:08 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:08] NOTE: connecting to '127.0.0.1': 127.0.0.1:24801
Feb 22 09:03:08 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:03:08] debug: Saying Hello to core client
Feb 22 09:03:17 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:17] NOTE: server is dead
Feb 22 09:03:17 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:03:17] debug: Error reading from core client: End of file
Feb 22 09:03:17 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:03:17] debug: Terminating core client read loop
Feb 22 09:03:17 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:17] WARNING: failed to connect to server: server is not responding
Feb 22 09:03:17 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:17] DEBUG: retry in 1 seconds
Feb 22 09:03:18 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:18] NOTE: connecting to '127.0.0.1': 127.0.0.1:24801
Feb 22 09:03:18 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:03:18] debug: Saying Hello to core client
Feb 22 09:03:27 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:27] NOTE: server is dead
Feb 22 09:03:27 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:03:27] debug: Error reading from core client: End of file
Feb 22 09:03:27 miguel-GalagoPro synergy-service[21300]: [ Router  ] [2018-02-22T09:03:27] debug: Terminating core client read loop
Feb 22 09:03:27 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:27] WARNING: failed to connect to server: server is not responding
Feb 22 09:03:27 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:27] DEBUG: retry in 1 seconds
Feb 22 09:03:28 miguel-GalagoPro synergy-service[21300]: [ Core    ] [2018-02-22T09:03:28] NOTE: connecting to '127.0.0.1': 127.0.0.1:24801

^G Get Help       ^O Write Out      ^W Where Is       ^K Cut Text       ^J Justify        ^C Cur Pos        ^Y Prev Page      M-\ First Line    M-W WhereIs Next  ^^ Mark Text      M-} Indent Text
^X Exit           ^R Read File      ^\ Replace        ^U Uncut Text     ^T To Spell       ^_ Go To Line     ^V Next Page      M-/ Last Line     M-] To Bracket    M-^ Copy Text     M-{ Unindent Text
 

 

 

no idea what all this means thought

Edited by mSedek

Share this post


Link to post
Share on other sites

... and at what time did the event occur? Anything in dmesg?

 

Share this post


Link to post
Share on other sites
10 minutes ago, jml said:

dmesg

[email protected] ~ $ sudo nano /var/lo
local/ lock/  log/   
[email protected] ~ $ sudo nano /var/lo
local/ lock/  log/   
[email protected] ~ $ sudo nano /var/log/sy
synergy/     syslog.1     syslog.3.gz  syslog.5.gz  syslog.7.gz  
syslog       syslog.2.gz  syslog.4.gz  syslog.6.gz  
[email protected] ~ $ sudo nano /var/log/sy
synergy/     syslog.1     syslog.3.gz  syslog.5.gz  syslog.7.gz  
syslog       syslog.2.gz  syslog.4.gz  syslog.6.gz  
[email protected] ~ $ sudo nano /var/log/syslog
[sudo] password for msedek: 
[email protected] ~ $ dmesg -wH
[Feb22 15:42] random: get_random_bytes called from start_kernel+0x42/0x50d with crng_init=0
[  +0,000000] Linux version 4.13.0-36-generic ([email protected]) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 (Ubuntu 4.13.0-36.40~16.04.1-generic 4.13.13)
[  +0,000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic root=UUID=6833400b-d460-4429-8248-ef54c2f8cbe3 ro quiet splash vt.handoff=7
[  +0,000000] KERNEL supported cpus:
[  +0,000000]   Intel GenuineIntel
[  +0,000000]   AMD AuthenticAMD
[  +0,000000]   Centaur CentaurHauls
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[  +0,000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[  +0,000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[  +0,000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[  +0,000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[  +0,000000] e820: BIOS-provided physical RAM map:
[  +0,000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[  +0,000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[  +0,000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[  +0,000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[  +0,000000] BIOS-e820: [mem 0x0000000000100000-0x000000006726ffff] usable
[  +0,000000] BIOS-e820: [mem 0x0000000067270000-0x0000000067270fff] ACPI NVS
[  +0,000000] BIOS-e820: [mem 0x0000000067271000-0x0000000067271fff] reserved
[  +0,000000] BIOS-e820: [mem 0x0000000067272000-0x000000007977afff] usable
[  +0,000000] BIOS-e820: [mem 0x000000007977b000-0x000000007a639fff] reserved
[  +0,000000] BIOS-e820: [mem 0x000000007a63a000-0x000000007a661fff] ACPI data
[  +0,000000] BIOS-e820: [mem 0x000000007a662000-0x000000007a66bfff] usable
[  +0,000000] BIOS-e820: [mem 0x000000007a66c000-0x000000007a6cafff] ACPI NVS
[  +0,000000] BIOS-e820: [mem 0x000000007a6cb000-0x000000007b32cfff] reserved
[  +0,000000] BIOS-e820: [mem 0x000000007b32d000-0x000000007b3fefff] type 20
[  +0,000000] BIOS-e820: [mem 0x000000007b3ff000-0x000000007b3fffff] usable
[  +0,000000] BIOS-e820: [mem 0x000000007b400000-0x000000007fffffff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[  +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000047effffff] usable
[  +0,000000] NX (Execute Disable) protection: active
[  +0,000000] efi: EFI v2.60 by American Megatrends
[  +0,000000] efi:  ACPI 2.0=0x7a66c000  ACPI=0x7a66c000  SMBIOS=0x7b28c000  SMBIOS 3.0=0x7b28b000  ESRT=0x78361298  MEMATTR=0x7837a418 
[  +0,000000] random: fast init done
[  +0,000000] SMBIOS 3.0.0 present.
[  +0,000000] DMI: System76 Galago Pro/Galago Pro, BIOS 1.05.08RSA 11/14/2017
[  +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[  +0,000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[  +0,000000] e820: last_pfn = 0x47f000 max_arch_pfn = 0x400000000
[  +0,000000] MTRR default type: write-back
[  +0,000000] MTRR fixed ranges enabled:
[  +0,000000]   00000-9FFFF write-back
[  +0,000000]   A0000-BFFFF uncachable
[  +0,000000]   C0000-FFFFF write-protect
[  +0,000000] MTRR variable ranges enabled:
[  +0,000000]   0 base 0080000000 mask 7F80000000 uncachable
[  +0,000000]   1 base 007C000000 mask 7FFC000000 uncachable
[  +0,000000]   2 base 007B800000 mask 7FFF800000 uncachable
[  +0,000000]   3 disabled
[  +0,000000]   4 disabled
[  +0,000000]   5 disabled
[  +0,000000]   6 disabled
[  +0,000000]   7 disabled
[  +0,000000]   8 disabled
[  +0,000000]   9 disabled
[  +0,000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[  +0,000000] e820: last_pfn = 0x7b400 max_arch_pfn = 0x400000000
[  +0,000000] esrt: Reserving ESRT space from 0x0000000078361298 to 0x00000000783612d0.
[  +0,000000] Scanning 1 areas for low memory corruption
[  +0,000000] Base memory trampoline at [ffff996300097000] 97000 size 24576
[  +0,000000] Using GB pages for direct mapping
[  +0,000000] BRK [0x2d012a000, 0x2d012afff] PGTABLE
[  +0,000000] BRK [0x2d012b000, 0x2d012bfff] PGTABLE
[  +0,000000] BRK [0x2d012c000, 0x2d012cfff] PGTABLE
[  +0,000000] BRK [0x2d012d000, 0x2d012dfff] PGTABLE
[  +0,000000] BRK [0x2d012e000, 0x2d012efff] PGTABLE
[  +0,000000] BRK [0x2d012f000, 0x2d012ffff] PGTABLE
[  +0,000000] BRK [0x2d0130000, 0x2d0130fff] PGTABLE
[  +0,000000] BRK [0x2d0131000, 0x2d0131fff] PGTABLE
[  +0,000000] BRK [0x2d0132000, 0x2d0132fff] PGTABLE
[  +0,000000] BRK [0x2d0133000, 0x2d0133fff] PGTABLE
[  +0,000000] Secure boot could not be determined
[  +0,000000] RAMDISK: [mem 0x31c96000-0x34e42fff]
[  +0,000000] ACPI: Early table checksum verification disabled
[  +0,000000] ACPI: RSDP 0x000000007A66C000 000024 (v02 ALASKA)
[  +0,000000] ACPI: XSDT 0x000000007A66C098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
[  +0,000000] ACPI: FACP 0x000000007A68C0E8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[  +0,000000] ACPI: DSDT 0x000000007A66C1E8 01FEFF (v02 ALASKA A M I    01072009 INTL 20160422)
[  +0,000000] ACPI: FACS 0x000000007A6CAF00 000040
[  +0,000000] ACPI: APIC 0x000000007A68C200 0000BC (v03 ALASKA A M I    01072009 AMI  00010013)
[  +0,000000] ACPI: FPDT 0x000000007A68C2C0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[  +0,000000] ACPI: FIDT 0x000000007A68C308 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[  +0,000000] ACPI: MCFG 0x000000007A68C3A8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[  +0,000000] ACPI: SSDT 0x000000007A68C3E8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[  +0,000000] ACPI: SSDT 0x000000007A68C748 00148A (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[  +0,000000] ACPI: HPET 0x000000007A68DBD8 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[  +0,000000] ACPI: UEFI 0x000000007A68DC10 000042 (v01 ALASKA A M I    00000002      01000013)
[  +0,000000] ACPI: SSDT 0x000000007A68DC58 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[  +0,000000] ACPI: SSDT 0x000000007A68F408 0009CF (v02 CtdpB  CtdpB    00001000 INTL 20160422)
[  +0,000000] ACPI: SSDT 0x000000007A68FDD8 00165F (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[  +0,000000] ACPI: DBGP 0x000000007A691438 000034 (v01 INTEL           00000002 MSFT 0000005F)
[  +0,000000] ACPI: DBG2 0x000000007A691470 000054 (v00 INTEL           00000002 MSFT 0000005F)
[  +0,000000] ACPI: DMAR 0x000000007A6914C8 0000A8 (v01 INTEL  KBL      00000001 INTL 00000001)
[  +0,000000] ACPI: BGRT 0x000000007A691570 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[  +0,000000] ACPI: ASF! 0x000000007A6915A8 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[  +0,000000] ACPI: WSMT 0x000000007A691648 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[  +0,000000] ACPI: Local APIC address 0xfee00000
[  +0,000000] No NUMA configuration found
[  +0,000000] Faking a node at [mem 0x0000000000000000-0x000000047effffff]
[  +0,000000] NODE_DATA(0) allocated [mem 0x47efd5000-0x47effffff]
[  +0,000000] Zone ranges:
[  +0,000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[  +0,000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[  +0,000000]   Normal   [mem 0x0000000100000000-0x000000047effffff]
[  +0,000000]   Device   empty
[  +0,000000] Movable zone start for each node
[  +0,000000] Early memory node ranges
[  +0,000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[  +0,000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[  +0,000000]   node   0: [mem 0x0000000000100000-0x000000006726ffff]
[  +0,000000]   node   0: [mem 0x0000000067272000-0x000000007977afff]
[  +0,000000]   node   0: [mem 0x000000007a662000-0x000000007a66bfff]
[  +0,000000]   node   0: [mem 0x000000007b3ff000-0x000000007b3fffff]
[  +0,000000]   node   0: [mem 0x0000000100000000-0x000000047effffff]
[  +0,000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047effffff]
[  +0,000000] On node 0 totalpages: 4163360
[  +0,000000]   DMA zone: 64 pages used for memmap
[  +0,000000]   DMA zone: 23 pages reserved
[  +0,000000]   DMA zone: 3996 pages, LIFO batch:0
[  +0,000000]   DMA32 zone: 7711 pages used for memmap
[  +0,000000]   DMA32 zone: 493444 pages, LIFO batch:31
[  +0,000000]   Normal zone: 57280 pages used for memmap
[  +0,000000]   Normal zone: 3665920 pages, LIFO batch:31
[  +0,000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[  +0,000000] ACPI: PM-Timer IO Port: 0x1808
[  +0,000000] ACPI: Local APIC address 0xfee00000
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[  +0,000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[  +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[  +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[  +0,000000] ACPI: IRQ0 used by override.
[  +0,000000] ACPI: IRQ9 used by override.
[  +0,000000] Using ACPI (MADT) for SMP configuration information
[  +0,000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[  +0,000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[  +0,000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[  +0,000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[  +0,000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[  +0,000000] PM: Registered nosave memory: [mem 0x67270000-0x67270fff]
[  +0,000000] PM: Registered nosave memory: [mem 0x67271000-0x67271fff]
[  +0,000000] PM: Registered nosave memory: [mem 0x7977b000-0x7a639fff]
[  +0,000000] PM: Registered nosave memory: [mem 0x7a63a000-0x7a661fff]
[  +0,000000] PM: Registered nosave memory: [mem 0x7a66c000-0x7a6cafff]
[  +0,000000] PM: Registered nosave memory: [mem 0x7a6cb000-0x7b32cfff]
[  +0,000000] PM: Registered nosave memory: [mem 0x7b32d000-0x7b3fefff]
[  +0,000000] PM: Registered nosave memory: [mem 0x7b400000-0x7fffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[  +0,000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[  +0,000000] Booting paravirtualized kernel on bare hardware
[  +0,000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[  +0,000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[  +0,000000] percpu: Embedded 45 pages/cpu @ffff99677ec00000 s146520 r8192 d29608 u262144
[  +0,000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152
[  +0,000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[  +0,000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4098282
[  +0,000000] Policy zone: Normal
[  +0,000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic root=UUID=6833400b-d460-4429-8248-ef54c2f8cbe3 ro quiet splash vt.handoff=7
[  +0,000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[  +0,000000] Calgary: detecting Calgary via BIOS EBDA area
[  +0,000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[  +0,000000] Memory: 15944808K/16653440K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2364K init, 2368K bss, 708632K reserved, 0K cma-reserved)
[  +0,000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[  +0,000000] Kernel/User page tables isolation: enabled
[  +0,000000] ftrace: allocating 37831 entries in 148 pages
[  +0,000000] Hierarchical RCU implementation.
[  +0,000000]     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[  +0,000000]     Tasks RCU enabled.
[  +0,000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[  +0,000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[  +0,000000] vt handoff: transparent VT on vt#7
[  +0,000000] Console: colour dummy device 80x25
[  +0,000000] console [tty0] enabled
[  +0,000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[  +0,000000] hpet clockevent registered
[  +0,000000] tsc: Detected 2000.000 MHz processor
[  +0,000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3984.00 BogoMIPS (lpj=7968000)
[  +0,000000] pid_max: default: 32768 minimum: 301
[  +0,000000] ACPI: Core revision 20170531
[  +0,042230] ACPI: 6 ACPI AML tables successfully acquired and loaded
[  +0,000917] Security Framework initialized
[  +0,000002] Yama: becoming mindful.
[  +0,000023] AppArmor: AppArmor initialized
[  +0,002925] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[  +0,001432] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[  +0,000050] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[  +0,000051] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[  +0,000231] CPU: Physical Processor ID: 0
[  +0,000001] CPU: Processor Core ID: 0
[  +0,000007] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[  +0,000000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[  +0,000003] FEATURE SPEC_CTRL Not Present
[  +0,000004] mce: CPU supports 10 MCE banks
[  +0,000013] CPU0: Thermal monitoring enabled (TM1)
[  +0,000028] process: using mwait in idle threads
[  +0,000003] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[  +0,000001] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[  +0,000002] Spectre V2 mitigation: Mitigation: Full generic retpoline
[  +0,000001] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[  +0,000001] Spectre V2 mitigation: Filling RSB on context switch
[  +0,000426] Freeing SMP alternatives memory: 36K
[  +0,012010] smpboot: Max logical packages: 2
[  +0,000007] DMAR: Host address width 39
[  +0,000001] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[  +0,000008] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[  +0,000002] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[  +0,000005] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[  +0,000001] DMAR: RMRR base: 0x00000079f8e000 end: 0x00000079fadfff
[  +0,000002] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[  +0,000002] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[  +0,000001] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[  +0,000002] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[  +0,001507] DMAR-IR: Enabled IRQ remapping in x2apic mode
[  +0,000001] x2apic enabled
[  +0,000011] Switched APIC routing to cluster x2apic.
[  +0,004158] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[  +0,039726] TSC deadline timer enabled
[  +0,000005] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[  +0,000082] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[  +0,000041] ... version:                4
[  +0,000001] ... bit width:              48
[  +0,000000] ... generic registers:      4
[  +0,000001] ... value mask:             0000ffffffffffff
[  +0,000001] ... max period:             00007fffffffffff
[  +0,000001] ... fixed-purpose events:   3
[  +0,000001] ... event mask:             000000070000000f
[  +0,000047] Hierarchical SRCU implementation.
[  +0,001275] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[  +0,000017] smp: Bringing up secondary CPUs ...
[  +0,000085] x86: Booting SMP configuration:
[  +0,000002] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[  +0,001675] smp: Brought up 1 node, 8 CPUs
[  +0,000000] smpboot: Total of 8 processors activated (31872.00 BogoMIPS)
[  +0,003517] devtmpfs: initialized
[  +0,000000] x86/mm: Memory block size: 128MB
[  +0,001012] evm: security.selinux
[  +0,000001] evm: security.SMACK64
[  +0,000001] evm: security.SMACK64EXEC
[  +0,000000] evm: security.SMACK64TRANSMUTE
[  +0,000001] evm: security.SMACK64MMAP
[  +0,000001] evm: security.ima
[  +0,000000] evm: security.capability
[  +0,000017] PM: Registering ACPI NVS region [mem 0x67270000-0x67270fff] (4096 bytes)
[  +0,000000] PM: Registering ACPI NVS region [mem 0x7a66c000-0x7a6cafff] (389120 bytes)
[  +0,000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[  +0,000000] futex hash table entries: 2048 (order: 5, 131072 bytes)
[  +0,000000] pinctrl core: initialized pinctrl subsystem
[  +0,000000] RTC time: 20:42:57, date: 02/22/18
[  +0,000000] NET: Registered protocol family 16
[  +0,000000] cpuidle: using governor ladder
[  +0,000000] cpuidle: using governor menu
[  +0,000000] PCCT header not found.
[  +0,000000] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[  +0,000000] ACPI: bus type PCI registered
[  +0,000000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[  +0,000000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[  +0,000000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[  +0,000000] PCI: Using configuration type 1 for base access
[  +0,003492] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[  +0,000000] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[  +0,000000] ACPI: Added _OSI(Module Device)
[  +0,000000] ACPI: Added _OSI(Processor Device)
[  +0,000000] ACPI: Added _OSI(3.0 _SCP Extensions)
[  +0,000000] ACPI: Added _OSI(Processor Aggregator Device)
[  +0,000439] ACPI: Executed 26 blocks of module-level executable AML code
[  +0,078807] ACPI: Dynamic OEM Table Load:
[  +0,000009] ACPI: SSDT 0xFFFF99676BD2D800 0005CD (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[  +0,000283] ACPI: Executed 1 blocks of module-level executable AML code
[  +0,000055] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[  +0,000460] ACPI: Dynamic OEM Table Load:
[  +0,000008] ACPI: SSDT 0xFFFF99676BFF7000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[  +0,000255] ACPI: Executed 1 blocks of module-level executable AML code
[  +0,000090] ACPI: Dynamic OEM Table Load:
[  +0,000000] ACPI: SSDT 0xFFFF99676B878000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
[  +0,000000] ACPI: Executed 1 blocks of module-level executable AML code
[  +0,002794] ACPI: Dynamic OEM Table Load:
[  +0,000008] ACPI: SSDT 0xFFFF99676BF28000 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[  +0,000304] ACPI: Executed 1 blocks of module-level executable AML code
[  +0,000014] ACPI: EC: EC started
[  +0,000000] ACPI: EC: interrupt blocked
[  +0,004728] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[  +0,000003] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[  +0,000002] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[  +0,000001] ACPI: Interpreter enabled
[  +0,000063] ACPI: (supports S0 S3 S4 S5)
[  +0,000001] ACPI: Using IOAPIC for interrupt routing
[  +0,000054] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[  +0,000550] ACPI: GPE 0x0D active on init
[  +0,000057] ACPI: Enabled 8 GPEs in block 00 to 7F
[  +0,034942] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[  +0,000007] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[  +0,000244] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[  +0,000223] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[  +0,000002] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[  +0,000735] PCI host bridge to bus 0000:00
[  +0,000003] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[  +0,000003] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[  +0,000001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[  +0,000001] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[  +0,000001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[  +0,000001] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[  +0,000002] pci_bus 0000:00: root bus resource [bus 00-fe]
[  +0,000011] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[  +0,000159] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[  +0,000015] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[  +0,000009] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[  +0,000006] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[  +0,000232] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[  +0,000027] pci 0000:00:14.0: reg 0x10: [mem 0xdc310000-0xdc31ffff 64bit]
[  +0,000077] pci 0000:00:14.0: PME# supported from D3hot D3cold
[  +0,000261] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[  +0,000026] pci 0000:00:14.2: reg 0x10: [mem 0xdc32e000-0xdc32efff 64bit]
[  +0,000201] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[  +0,000022] pci 0000:00:16.0: reg 0x10: [mem 0xdc32d000-0xdc32dfff 64bit]
[  +0,000059] pci 0000:00:16.0: PME# supported from D3hot
[  +0,000211] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[  +0,000019] pci 0000:00:17.0: reg 0x10: [mem 0xdc328000-0xdc329fff]
[  +0,000006] pci 0000:00:17.0: reg 0x14: [mem 0xdc32c000-0xdc32c0ff]
[  +0,000007] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[  +0,000007] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[  +0,000006] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[  +0,000007] pci 0000:00:17.0: reg 0x24: [mem 0xdc32b000-0xdc32b7ff]
[  +0,000043] pci 0000:00:17.0: PME# supported from D3hot
[  +0,000176] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[  +0,000226] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[  +0,000217] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[  +0,000075] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[  +0,000203] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[  +0,000076] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[  +0,000209] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[  +0,000089] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[  +0,000228] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[  +0,000276] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[  +0,000017] pci 0000:00:1f.2: reg 0x10: [mem 0xdc324000-0xdc327fff]
[  +0,000204] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[  +0,000030] pci 0000:00:1f.3: reg 0x10: [mem 0xdc320000-0xdc323fff 64bit]
[  +0,000028] pci 0000:00:1f.3: reg 0x20: [mem 0xdc300000-0xdc30ffff 64bit]
[  +0,000052] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[  +0,000291] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[  +0,000061] pci 0000:00:1f.4: reg 0x10: [mem 0xdc32a000-0xdc32a0ff 64bit]
[  +0,000070] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[  +0,000362] pci 0000:01:00.0: [8086:15da] type 01 class 0x060400
[  +0,000136] pci 0000:01:00.0: supports D1 D2
[  +0,000002] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[  +0,009397] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[  +0,000006] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xda0fffff]
[  +0,000006] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[  +0,000065] pci 0000:02:00.0: [8086:15da] type 01 class 0x060400
[  +0,000145] pci 0000:02:00.0: supports D1 D2
[  +0,000002] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[  +0,000088] pci 0000:02:01.0: [8086:15da] type 01 class 0x060400
[  +0,000141] pci 0000:02:01.0: supports D1 D2
[  +0,000002] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[  +0,000080] pci 0000:02:02.0: [8086:15da] type 01 class 0x060400
[  +0,000140] pci 0000:02:02.0: supports D1 D2
[  +0,000002] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[  +0,000104] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[  +0,000010] pci 0000:01:00.0:   bridge window [mem 0xc4000000-0xda0fffff]
[  +0,000007] pci 0000:01:00.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[  +0,000047] pci 0000:02:00.0: PCI bridge to [bus 03]
[  +0,000010] pci 0000:02:00.0:   bridge window [mem 0xda000000-0xda0fffff]
[  +0,000056] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[  +0,000010] pci 0000:02:01.0:   bridge window [mem 0xc4000000-0xd9efffff]
[  +0,000008] pci 0000:02:01.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[  +0,000047] pci 0000:02:02.0: PCI bridge to [bus 39]
[  +0,000010] pci 0000:02:02.0:   bridge window [mem 0xd9f00000-0xd9ffffff]
[  +0,000159] pci 0000:3a:00.0: [10ec:5287] type 00 class 0xff0000
[  +0,000031] pci 0000:3a:00.0: reg 0x10: [mem 0xdc215000-0xdc215fff]
[  +0,000049] pci 0000:3a:00.0: reg 0x30: [mem 0xdc200000-0xdc20ffff pref]
[  +0,000094] pci 0000:3a:00.0: supports D1 D2
[  +0,000002] pci 0000:3a:00.0: PME# supported from D1 D2 D3hot D3cold
[  +0,000104] pci 0000:3a:00.1: [10ec:8168] type 00 class 0x020000
[  +0,000032] pci 0000:3a:00.1: reg 0x10: [io  0xe000-0xe0ff]
[  +0,000031] pci 0000:3a:00.1: reg 0x18: [mem 0xdc214000-0xdc214fff 64bit]
[  +0,000019] pci 0000:3a:00.1: reg 0x20: [mem 0xdc210000-0xdc213fff 64bit]
[  +0,000100] pci 0000:3a:00.1: supports D1 D2
[  +0,000002] pci 0000:3a:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[  +0,010393] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[  +0,000003] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[  +0,000004] pci 0000:00:1c.4:   bridge window [mem 0xdc200000-0xdc2fffff]
[  +0,000167] pci 0000:3b:00.0: [8086:24fb] type 00 class 0x028000
[  +0,000063] pci 0000:3b:00.0: reg 0x10: [mem 0xdc100000-0xdc101fff 64bit]
[  +0,000201] pci 0000:3b:00.0: PME# supported from D0 D3hot D3cold
[  +0,011576] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[  +0,000006] pci 0000:00:1c.5:   bridge window [mem 0xdc100000-0xdc1fffff]
[  +0,000154] pci 0000:3c:00.0: [144d:a804] type 00 class 0x010802
[  +0,000032] pci 0000:3c:00.0: reg 0x10: [mem 0xdc000000-0xdc003fff 64bit]
[  +0,011797] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[  +0,000006] pci 0000:00:1d.0:   bridge window [mem 0xdc000000-0xdc0fffff]
[  +0,001540] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[  +0,000068] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[  +0,000064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[  +0,000063] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[  +0,000063] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[  +0,000062] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[  +0,000066] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[  +0,000065] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[  +0,000659] ACPI: EC: interrupt unblocked
[  +0,000014] ACPI: EC: event unblocked
[  +0,000014] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[  +0,000001] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[  +0,000243] SCSI subsystem initialized
[  +0,000019] libata version 3.00 loaded.
[  +0,000000] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[  +0,000000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[  +0,000000] pci 0000:00:02.0: vgaarb: bridge control possible
[  +0,000000] vgaarb: loaded
[  +0,000000] ACPI: bus type USB registered
[  +0,000000] usbcore: registered new interface driver usbfs
[  +0,000000] usbcore: registered new interface driver hub
[  +0,000000] usbcore: registered new device driver usb
[  +0,000000] EDAC MC: Ver: 3.0.0
[  +0,000000] Registered efivars operations
[  +0,018163] PCI: Using ACPI for IRQ routing
[  +0,023782] PCI: pci_cache_line_size set to 64 bytes
[  +0,000153] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[  +0,000002] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[  +0,000001] e820: reserve RAM buffer [mem 0x67270000-0x67ffffff]
[  +0,000001] e820: reserve RAM buffer [mem 0x7977b000-0x7bffffff]
[  +0,000002] e820: reserve RAM buffer [mem 0x7a66c000-0x7bffffff]
[  +0,000001] e820: reserve RAM buffer [mem 0x7b400000-0x7bffffff]
[  +0,000002] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff]
[  +0,000092] NetLabel: Initializing
[  +0,000001] NetLabel:  domain hash size = 128
[  +0,000000] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[  +0,000019] NetLabel:  unlabeled traffic allowed by default
[  +0,000017] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[  +0,000000] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[  +0,000910] clocksource: Switched to clocksource hpet
[  +0,009446] VFS: Disk quotas dquot_6.6.0
[  +0,000017] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  +0,000112] AppArmor: AppArmor Filesystem Enabled
[  +0,000036] pnp: PnP ACPI init
[  +0,000285] system 00:00: [io  0x0680-0x069f] has been reserved
[  +0,000002] system 00:00: [io  0xffff] has been reserved
[  +0,000002] system 00:00: [io  0xffff] has been reserved
[  +0,000002] system 00:00: [io  0xffff] has been reserved
[  +0,000002] system 00:00: [io  0x1800-0x18fe] has been reserved
[  +0,000002] system 00:00: [io  0x164e-0x164f] has been reserved
[  +0,000002] system 00:00: [io  0x3322-0x3323] has been reserved
[  +0,000005] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[  +0,000142] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[  +0,000051] system 00:02: [io  0x1854-0x1857] has been reserved
[  +0,000003] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[  +0,000028] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[  +0,000161] pnp 00:04: Plug and Play ACPI device, IDs SYN1221 PNP0f13 (active)
[  +0,000314] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[  +0,000003] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[  +0,000002] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[  +0,000002] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[  +0,000002] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[  +0,000003] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[  +0,000002] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[  +0,000002] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[  +0,000002] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[  +0,000003] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[  +0,000003] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[  +0,000054] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[  +0,000002] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[  +0,000002] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[  +0,000003] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[  +0,000002] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[  +0,000002] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[  +0,000002] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[  +0,000003] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[  +0,000419] system 00:07: [io  0xff00-0xfffe] has been reserved
[  +0,000003] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[  +0,001594] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[  +0,000002] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[  +0,000002] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[  +0,000003] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[  +0,000797] pnp: PnP ACPI: found 9 devices
[  +0,007960] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[  +0,000026] pci 0000:02:01.0: bridge window [io  0x1000-0x0fff] to [bus 04-38] add_size 1000
[  +0,000011] pci 0000:02:02.0: bridge window [io  0x1000-0x0fff] to [bus 39] add_size 1000
[  +0,000003] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[  +0,000011] pci 0000:01:00.0: bridge window [io  0x1000-0x0fff] to [bus 02-39] add_size 2000
[  +0,000007] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01-39] add_size 2000
[  +0,000025] pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x5fff]
[  +0,000004] pci 0000:01:00.0: BAR 13: assigned [io  0x4000-0x5fff]
[  +0,000006] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[  +0,000002] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[  +0,000002] pci 0000:02:01.0: BAR 13: assigned [io  0x4000-0x4fff]
[  +0,000003] pci 0000:02:02.0: BAR 13: assigned [io  0x5000-0x5fff]
[  +0,000004] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[  +0,000001] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[  +0,000002] pci 0000:02:00.0: PCI bridge to [bus 03]
[  +0,000007] pci 0000:02:00.0:   bridge window [mem 0xda000000-0xda0fffff]
[  +0,000010] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[  +0,000003] pci 0000:02:01.0:   bridge window [io  0x4000-0x4fff]
[  +0,000006] pci 0000:02:01.0:   bridge window [mem 0xc4000000-0xd9efffff]
[  +0,000005] pci 0000:02:01.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[  +0,000007] pci 0000:02:02.0: PCI bridge to [bus 39]
[  +0,000003] pci 0000:02:02.0:   bridge window [io  0x5000-0x5fff]
[  +0,000006] pci 0000:02:02.0:   bridge window [mem 0xd9f00000-0xd9ffffff]
[  +0,000009] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[  +0,000003] pci 0000:01:00.0:   bridge window [io  0x4000-0x5fff]
[  +0,000006] pci 0000:01:00.0:   bridge window [mem 0xc4000000-0xda0fffff]
[  +0,000005] pci 0000:01:00.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[  +0,000006] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[  +0,000003] pci 0000:00:1c.0:   bridge window [io  0x4000-0x5fff]
[  +0,000004] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xda0fffff]
[  +0,000004] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[  +0,000006] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[  +0,000002] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[  +0,000004] pci 0000:00:1c.4:   bridge window [mem 0xdc200000-0xdc2fffff]
[  +0,000008] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[  +0,000004] pci 0000:00:1c.5:   bridge window [mem 0xdc100000-0xdc1fffff]
[  +0,000007] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[  +0,000005] pci 0000:00:1d.0:   bridge window [mem 0xdc000000-0xdc0fffff]
[  +0,000009] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[  +0,000002] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[  +0,000002] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[  +0,000002] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[  +0,000002] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[  +0,000001] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[  +0,000002] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[  +0,000002] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[  +0,000002] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[  +0,000001] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[  +0,000002] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[  +0,000002] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[  +0,000002] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[  +0,000002] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[  +0,000002] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[  +0,000001] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[  +0,000002] pci_bus 0000:00: resource 20 [mem 0x80000000-0xdfffffff window]
[  +0,000002] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[  +0,000002] pci_bus 0000:01: resource 0 [io  0x4000-0x5fff]
[  +0,000002] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[  +0,000002] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[  +0,000002] pci_bus 0000:02: resource 0 [io  0x4000-0x5fff]
[  +0,000001] pci_bus 0000:02: resource 1 [mem 0xc4000000-0xda0fffff]
[  +0,000002] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[  +0,000002] pci_bus 0000:03: resource 1 [mem 0xda000000-0xda0fffff]
[  +0,000002] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[  +0,000002] pci_bus 0000:04: resource 1 [mem 0xc4000000-0xd9efffff]
[  +0,000002] pci_bus 0000:04: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[  +0,000001] pci_bus 0000:39: resource 0 [io  0x5000-0x5fff]
[  +0,000002] pci_bus 0000:39: resource 1 [mem 0xd9f00000-0xd9ffffff]
[  +0,000002] pci_bus 0000:3a: resource 0 [io  0xe000-0xefff]
[  +0,000002] pci_bus 0000:3a: resource 1 [mem 0xdc200000-0xdc2fffff]
[  +0,000002] pci_bus 0000:3b: resource 1 [mem 0xdc100000-0xdc1fffff]
[  +0,000001] pci_bus 0000:3c: resource 1 [mem 0xdc000000-0xdc0fffff]
[  +0,000181] NET: Registered protocol family 2
[  +0,000198] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[  +0,000229] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[  +0,000128] TCP: Hash tables configured (established 131072 bind 65536)
[  +0,000043] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[  +0,000058] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[  +0,000080] NET: Registered protocol family 1
[  +0,000014] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[  +0,000298] PCI: CLS mismatch (64 != 128), using 64 bytes
[  +0,000044] Unpacking initramfs...
[  +1,070043] Freeing initrd memory: 50868K
[  +0,000043] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[  +0,000003] software IO TLB [mem 0x620bc000-0x660bc000] (64MB) mapped at [ffff9963620bc000-ffff9963660bbfff]
[  +0,000315] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[  +0,000260] Scanning for low memory corruption every 60 seconds
[  +0,000463] audit: initializing netlink subsys (disabled)
[  +0,000089] audit: type=2000 audit(1519332177.436:1): state=initialized audit_enabled=0 res=1
[  +0,000461] Initialise system trusted keyrings
[  +0,000014] Key type blacklist registered
[  +0,000069] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[  +0,001334] zbud: loaded
[  +0,000667] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[  +0,000193] fuse init (API version 7.26)
[  +0,003237] Key type asymmetric registered
[  +0,000004] Asymmetric key parser 'x509' registered
[  +0,000045] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[  +0,000072] io scheduler noop registered
[  +0,000001] io scheduler deadline registered
[  +0,000031] io scheduler cfq registered (default)
[  +0,001076] pcieport 0000:01:00.0: enabling device (0006 -> 0007)
[  +0,000461] pcieport 0000:02:01.0: enabling device (0006 -> 0007)
[  +0,000208] pcieport 0000:02:02.0: enabling device (0006 -> 0007)
[  +0,000254] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[  +0,000029] pcieport 0000:00:1c.4: AER enabled with IRQ 123
[  +0,000030] pcieport 0000:00:1c.5: AER enabled with IRQ 124
[  +0,000028] pcieport 0000:00:1d.0: AER enabled with IRQ 125
[  +0,000089] efifb: probing for efifb
[  +0,000013] efifb: framebuffer at 0x90000000, using 22528k, total 22528k
[  +0,000002] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[  +0,000000] efifb: scrolling: redraw
[  +0,000002] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[  +0,000222] Console: switching to colour frame buffer device 400x112
[  +0,000076] fb0: EFI VGA frame buffer device
[  +0,000008] intel_idle: MWAIT substates: 0x11142120
[  +0,000001] intel_idle: v0.4.1 model 0x8E
[  +0,000521] intel_idle: lapic_timer_reliable_states 0xffffffff
[  +0,002359] ACPI: AC Adapter [AC] (on-line)
[  +0,000100] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[  +0,000058] ACPI: Power Button [PWRB]
[  +0,000049] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[  +0,000049] ACPI: Sleep Button [SLPB]
[  +0,000079] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[  +0,000086] ACPI: Lid Switch [LID0]
[  +0,000039] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[  +0,000047] ACPI: Power Button [PWRF]
[  +0,000434] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[  +0,000066] thermal LNXTHERM:00: registered as thermal_zone0
[  +0,000001] ACPI: Thermal Zone [TZ0] (48 C)
[  +0,000042] GHES: HEST is not enabled!
[  +0,000137] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[  +0,000443] ACPI: Battery Slot [BAT0] (battery present)
[  +0,002038] Linux agpgart interface v0.103
[  +0,002813] loop: module loaded
[  +0,000171] libphy: Fixed MDIO Bus: probed
[  +0,000001] tun: Universal TUN/TAP device driver, 1.6
[  +0,000054] PPP generic driver version 2.4.2
[  +0,000060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  +0,000002] ehci-pci: EHCI PCI platform driver
[  +0,000012] ehci-platform: EHCI generic platform driver
[  +0,000009] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[  +0,000002] ohci-pci: OHCI PCI platform driver
[  +0,000009] ohci-platform: OHCI generic platform driver
[  +0,000006] uhci_hcd: USB Universal Host Controller Interface driver
[  +0,000157] xhci_hcd 0000:00:14.0: xHCI Host Controller
[  +0,000010] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[  +0,001152] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[  +0,000010] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[  +0,000093] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  +0,000002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000002] usb usb1: Product: xHCI Host Controller
[  +0,000002] usb usb1: Manufacturer: Linux 4.13.0-36-generic xhci-hcd
[  +0,000001] usb usb1: SerialNumber: 0000:00:14.0
[  +0,000175] hub 1-0:1.0: USB hub found
[  +0,000016] hub 1-0:1.0: 12 ports detected
[  +0,000558] xhci_hcd 0000:00:14.0: xHCI Host Controller
[  +0,000004] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[  +0,000039] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[  +0,000002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000002] usb usb2: Product: xHCI Host Controller
[  +0,000002] usb usb2: Manufacturer: Linux 4.13.0-36-generic xhci-hcd
[  +0,000001] usb usb2: SerialNumber: 0000:00:14.0
[  +0,000166] hub 2-0:1.0: USB hub found
[  +0,000012] hub 2-0:1.0: 6 ports detected
[  +0,000211] usb: port power management may be unreliable
[  +0,000335] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
[  +0,005043] i8042: Detected active multiplexing controller, rev 1.1
[  +0,002624] serio: i8042 KBD port at 0x60,0x64 irq 1
[  +0,000005] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[  +0,000034] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[  +0,000025] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[  +0,000022] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[  +0,000251] mousedev: PS/2 mouse device common for all mice
[  +0,000537] rtc_cmos 00:01: RTC can wake from S4
[  +0,000459] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[  +0,000110] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[  +0,000007] i2c /dev entries driver
[  +0,000046] device-mapper: uevent: version 1.0.3
[  +0,000082] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
[  +0,000003] intel_pstate: Intel P-state driver initializing
[  +0,001432] intel_pstate: HWP enabled
[  +0,000380] ledtrig-cpu: registered to indicate activity on CPUs
[  +0,000001] EFI Variables Facility v0.08 2004-May-17
[  +0,001233] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[  +0,022290] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
[  +0,000193] NET: Registered protocol family 10
[  +0,004114] Segment Routing with IPv6
[  +0,000010] NET: Registered protocol family 17
[  +0,000004] Key type dns_resolver registered
[  +0,000993] RAS: Correctable Errors collector initialized.
[  +0,000091] microcode: sig=0x806ea, pf=0x80, revision=0x70
[  +0,000356] microcode: Microcode Update Driver: v2.2.
[  +0,000119] sched_clock: Marking stable (1498054214, 0)->(1541494877, -43440663)
[  +0,000836] registered taskstats version 1
[  +0,000005] Loading compiled-in X.509 certificates
[  +0,001998] Loaded X.509 cert 'Build time autogenerated kernel key: 6392960b5d1a7feefef54e83c93c27dba99187fc'
[  +0,000571] Couldn't get size: 0x800000000000000e
[  +0,000002] MODSIGN: Couldn't get UEFI db list
[  +0,002554] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[  +0,000851] zswap: loaded using pool lzo/zbud
[  +0,003006] Key type big_key registered
[  +0,000003] Key type trusted registered
[  +0,001657] Key type encrypted registered
[  +0,000003] AppArmor: AppArmor sha1 policy hashing enabled
[  +0,000002] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[  +0,000012] evm: HMAC attrs: 0x1
[  +0,000642]   Magic number: 6:435:751
[  +0,000003] misc uinput: hash matches
[  +0,000008] tty ttyS2: hash matches
[  +0,000195] rtc_cmos 00:01: setting system clock to 2018-02-22 20:42:58 UTC (1519332178)
[  +0,000254] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[  +0,000000] EDD information not available.
[  +0,000025] PM: Hibernation image not present or could not be loaded.
[  +0,001496] Freeing unused kernel memory: 2364K
[  +0,000001] Write protecting the kernel read-only data: 18432k
[  +0,002226] Freeing unused kernel memory: 2024K
[  +0,000217] Freeing unused kernel memory: 88K
[  +0,001050] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[  +0,000001] x86/mm: Checking user space page tables
[  +0,001032] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[  +0,069223] ahci 0000:00:17.0: version 3.0
[  +0,000006] ahci 0000:00:17.0: enabling device (0000 -> 0003)
[  +0,000180] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[  +0,000003] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[  +0,000228] scsi host0: ahci
[  +0,000046] ata1: SATA max UDMA/133 abar [email protected] port 0xdc32b100 irq 131
[  +0,004360] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[  +0,000007] r8169 0000:3a:00.1: can't disable ASPM; OS doesn't have ASPM control
[  +0,003129] nvme nvme0: pci function 0000:3c:00.0
[  +0,011042] r8169 0000:3a:00.1 eth0: RTL8411 at 0xffffb0f6c003d000, 80:fa:5b:4f:5b:2a, XID 1c800800 IRQ 133
[  +0,000002] r8169 0000:3a:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[  +0,000122] rtsx_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[  +0,023726] r8169 0000:3a:00.1 enp58s0f1: renamed from eth0
[  +0,019294] [drm] Memory usable by graphics device = 4096M
[  +0,000002] checking generic (90000000 1600000) vs hw (90000000 10000000)
[  +0,000000] fb: switching to inteldrmfb from EFI VGA
[  +0,000018] Console: switching to colour dummy device 80x25
[  +0,000104] [drm] Replacing VGA console driver
[  +0,006147] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[  +0,000001] [drm] Driver supports precise vblank timestamp query.
[  +0,008552] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[  +0,000652] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[  +0,019162] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[  +0,000198] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[  +0,000283] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[  +0,046219] fbcon: inteldrmfb (fb0) is primary device
[  +0,000083] Console: switching to colour frame buffer device 400x112
[  +0,000053] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[  +0,054376] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[  +0,066995]  nvme0n1: p1 p2 p3 p4 p6
[  +0,052621] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  +0,010624] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  +0,000002] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  +0,000002] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  +0,035902] usb 1-4: New USB device found, idVendor=04f2, idProduct=b59d
[  +0,000001] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[  +0,000001] usb 1-4: Product: Chicony USB2.0 Camera
[  +0,000001] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
[  +0,000001] usb 1-4: SerialNumber: 200901010001
[  +0,001313] ata1.00: ATA-10: ST1000LM048-2E7172, SDM1, max UDMA/133
[  +0,000002] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[  +0,023981] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  +0,000002] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  +0,000001] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  +0,037198] ata1.00: configured for UDMA/133
[  +0,000348] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM048-2E71 SDM1 PQ: 0 ANSI: 5
[  +0,059437] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[  +0,031776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  +0,000425] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[  +0,000002] sd 0:0:0:0: [sda] 4096-byte physical blocks
[  +0,000117] sd 0:0:0:0: [sda] Write Protect is off
[  +0,000001] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  +0,000140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  +0,074079]  sda: sda1 sda2
[  +0,001344] sd 0:0:0:0: [sda] Attached SCSI disk
[  +0,033988] usb 1-5: New USB device found, idVendor=8087, idProduct=0aa7
[  +0,000001] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  +0,246577] clocksource: Switched to clocksource tsc
[  +0,359303] psmouse serio2: synaptics: queried max coordinates: x [..5718], y [..4908]
[  +0,015784] raid6: sse2x1   gen() 10850 MB/s
[  +0,008532] [drm] RC6 on
[  +0,039476] raid6: sse2x1   xor()  5594 MB/s
[  +0,048003] raid6: sse2x2   gen() 11335 MB/s
[  +0,005579] psmouse serio2: synaptics: queried min coordinates: x [1238..], y [956..]
[  +0,000003] psmouse serio2: synaptics: Your touchpad (PNP: SYN1221 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to [email protected]
[  +0,042412] raid6: sse2x2   xor()  7047 MB/s
[  +0,047998] raid6: sse2x4   gen() 12220 MB/s
[  +0,048002] raid6: sse2x4   xor()  9303 MB/s
[  +0,009930] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00223/0x840300/0x26800/0x0, board id: 3175, fw id: 2330500
[  +0,038070] raid6: avx2x1   gen() 23822 MB/s
[  +0,004423] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[  +0,043578] raid6: avx2x1   xor() 17289 MB/s
[  +0,048002] raid6: avx2x2   gen() 27625 MB/s
[  +0,048000] raid6: avx2x2   xor() 18859 MB/s
[  +0,048000] raid6: avx2x4   gen() 30989 MB/s
[  +0,047999] raid6: avx2x4   xor() 22579 MB/s
[  +0,000001] raid6: using algorithm avx2x4 gen() 30989 MB/s
[  +0,000000] raid6: .... xor() 22579 MB/s, rmw enabled
[  +0,000001] raid6: using avx2x2 recovery algorithm
[  +0,001223] xor: automatically using best checksumming function   avx       
[  +0,011085] Btrfs loaded, crc32c=crc32c-intel
[  +0,083020] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[Feb22 15:43] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[  +0,000190] systemd[1]: Detected architecture x86-64.
[  +0,000114] systemd[1]: Set hostname to <miguel-GalagoPro>.
[  +0,047559] systemd[1]: Listening on Journal Socket (/dev/log).
[  +0,000097] systemd[1]: Listening on udev Control Socket.
[  +0,000007] systemd[1]: Reached target User and Group Name Lookups.
[  +0,000049] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[  +0,000104] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  +0,000019] systemd[1]: Listening on LVM2 metadata daemon socket.
[  +0,000014] systemd[1]: Listening on fsck to fsckd communication Socket.
[  +0,011575] lp: driver loaded but no devices found
[  +0,005317] ppdev: user-space parallel port driver
[  +0,045098] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[  +0,006034] systemd-journald[386]: Received request to flush runtime journal from PID 1
[  +0,093568] random: crng init done
[  +0,018684] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[  +0,000174] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  +0,000700] media: Linux media interface: v0.10
[  +0,003809] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[  +0,003811] Linux video capture interface: v2.00
[  +0,003641] Bluetooth: Core ver 2.22
[  +0,000014] NET: Registered protocol family 31
[  +0,000000] Bluetooth: HCI device and connection manager initialized
[  +0,000004] Bluetooth: HCI socket layer initialized
[  +0,000002] Bluetooth: L2CAP socket layer initialized
[  +0,000004] Bluetooth: SCO socket layer initialized
[  +0,008852] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[  +0,000002] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[  +0,000001] RAPL PMU: hw unit of domain package 2^-14 Joules
[  +0,000001] RAPL PMU: hw unit of domain dram 2^-14 Joules
[  +0,000001] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[  +0,000000] RAPL PMU: hw unit of domain psys 2^-14 Joules
[  +0,001016] usbcore: registered new interface driver btusb
[  +0,000709] uvcvideo: Found UVC 1.00 device Chicony USB2.0 Camera (04f2:b59d)
[  +0,000975] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[  +0,000002] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[  +0,000002] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[  +0,000076] input: Chicony USB2.0 Camera: Chicony  as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input14
[  +0,000071] usbcore: registered new interface driver uvcvideo
[  +0,000001] USB Video Class driver (1.1.1)
[  +0,006869] Intel(R) Wireless WiFi driver for Linux
[  +0,000001] Copyright(c) 2003- 2015 Intel Corporation
[  +0,000072] iwlwifi 0000:3b:00.0: enabling device (0000 -> 0002)
[  +0,001146] Bluetooth: hci0: read Intel version: 370810225019140f0d
[  +0,000001] Bluetooth: hci0: Intel device is already patched. patch num: 0d
[  +0,002557] iwlwifi 0000:3b:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm
[  +0,000181] AVX2 version of gcm_enc/dec engaged.
[  +0,000001] AES CTR mode by8 optimization enabled
[  +0,027843] iwlwifi 0000:3b:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
[  +0,016236] intel_rapl: Found RAPL domain package
[  +0,000002] intel_rapl: Found RAPL domain core
[  +0,000001] intel_rapl: Found RAPL domain uncore
[  +0,000001] intel_rapl: Found RAPL domain dram
[  +0,002833] iwlwifi 0000:3b:00.0: base HW address: 28:c6:3f:ef:d8:d7
[  +0,022093] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[  +0,000190] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[  +0,017093] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[  +0,000275] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[  +0,000035] thermal thermal_zone3: failed to read out thermal zone (-5)
[  +0,013307] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[  +0,000003] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  +0,000003] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[  +0,000001] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[  +0,000001] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[  +0,000003] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[  +0,000001] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[  +0,001507] iwlwifi 0000:3b:00.0 wlp59s0: renamed from wlan0
[  +0,014554] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[  +0,000103] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[  +0,000085] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[  +0,000071] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[  +0,000053] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[  +0,000056] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[  +0,000042] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[  +0,157365] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  +0,056162] audit: type=1400 audit(1519332181.626:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=950 comm="apparmor_parser"
[  +0,001042] audit: type=1400 audit(1519332181.627:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=947 comm="apparmor_parser"
[  +0,000004] audit: type=1400 audit(1519332181.627:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=947 comm="apparmor_parser"
[  +0,000002] audit: type=1400 audit(1519332181.627:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=947 comm="apparmor_parser"
[  +0,000427] audit: type=1400 audit(1519332181.628:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4017/usr/lib/snapd/snap-confine" pid=945 comm="apparmor_parser"
[  +0,000006] audit: type=1400 audit(1519332181.628:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4017/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=945 comm="apparmor_parser"
[  +0,000004] audit: type=1400 audit(1519332181.628:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4017/usr/lib/snapd/snap-confine//snap_update_ns" pid=945 comm="apparmor_parser"
[  +0,000020] audit: type=1400 audit(1519332181.628:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=948 comm="apparmor_parser"
[  +0,000226] audit: type=1400 audit(1519332181.628:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=944 comm="apparmor_parser"
[  +0,038067] new mount options do not match the existing superblock, will be ignored
[  +0,039145] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  +0,000001] Bluetooth: BNEP filters: protocol multicast
[  +0,000002] Bluetooth: BNEP socket layer initialized
[  +0,152861] IPv6: ADDRCONF(NETDEV_UP): wlp59s0: link is not ready
[  +0,072228] IPv6: ADDRCONF(NETDEV_UP): wlp59s0: link is not ready
[  +0,003392] IPv6: ADDRCONF(NETDEV_UP): enp58s0f1: link is not ready
[  +0,021642] r8169 0000:3a:00.1 enp58s0f1: link down
[  +0,000064] IPv6: ADDRCONF(NETDEV_UP): enp58s0f1: link is not ready
[  +0,092233] IPv6: ADDRCONF(NETDEV_UP): wlp59s0: link is not ready
[  +0,161868] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[  +0,000005] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[  +0,000002] pcieport 0000:00:1c.0:   device [8086:9d10] error status/mask=00000001/00002000
[  +0,000002] pcieport 0000:00:1c.0:    [ 0] Receiver Error         (First)
[  +0,074685] pci_bus 0000:03: busn_res: [bus 03] is released
[  +0,000071] pci_bus 0000:04: busn_res: [bus 04-38] is released
[  +0,000058] pci_bus 0000:39: busn_res: [bus 39] is released
[  +0,000062] pci_bus 0000:02: busn_res: [bus 02-39] is released
[  +4,600491] wlp59s0: authenticate with 98:de:d0:76:5e:0c
[  +0,003366] wlp59s0: send auth to 98:de:d0:76:5e:0c (try 1/3)
[  +0,002612] wlp59s0: authenticated
[  +0,002274] wlp59s0: associate with 98:de:d0:76:5e:0c (try 1/3)
[  +0,003735] wlp59s0: RX AssocResp from 98:de:d0:76:5e:0c (capab=0x431 status=0 aid=6)
[  +0,007268] wlp59s0: associated
[  +0,000016] IPv6: ADDRCONF(NETDEV_CHANGE): wlp59s0: link becomes ready
[  +2,805501] Bluetooth: RFCOMM TTY layer initialized
[  +0,000006] Bluetooth: RFCOMM socket layer initialized
[  +0,000005] Bluetooth: RFCOMM ver 1.11
[Feb22 19:05] iwlwifi 0000:3b:00.0: Too many chunks: 20
[  +1,636814] iwlwifi 0000:3b:00.0: Too many chunks: 20
[Feb22 19:08] iwlwifi 0000:3b:00.0: Too many chunks: 20
[  +0,921877] iwlwifi 0000:3b:00.0: Too many chunks: 20
[ +14,121836] iwlwifi 0000:3b:00.0: Too many chunks: 20
[Feb22 19:09] iwlwifi 0000:3b:00.0: Too many chunks: 20
^A^[^C
[email protected] ~ $ 
 

Share this post


Link to post
Share on other sites

the thing is that if you promote and sell a software we the costumers expect to have something functional out of the box... not start with this struggle  hopping to some how for the mercy of somebody make the product work decently..

 

I know it is not my hardware as I have 2x 2k usd computers with last generation everything specially made for LINUX from the system 76 boutique .. intel 8th gen 8550U 16gb ddr4 and 500gb m.2 samsung evo ssd.. and also did fresh installs on the noperative system ..so im more than  sure that is not me 

Edited by mSedek
  • Like 1

Share this post


Link to post
Share on other sites
11 hours ago, mSedek said:

which was unfairly closed with no solution

The thread was getting off topic, that's why it was locked. The solution is a bug fix, which we're working on. There is no workaround right now I'm afraid, so you'll have to wait for the bug fix. Thanks for your patience and sorry for the delay.

Please could you make sure you raise a support ticket? https://symless.com/contact/customer-support

Share this post


Link to post
Share on other sites

[Feb22 19:05] 

Is that the approximate time of the event? 

Share this post


Link to post
Share on other sites

I dont Know the time of the event.. it happens oftem.. dont Know what the time has to do with it

Share this post


Link to post
Share on other sites

Trying to determine if any of the log entries match up to the time of the event; for example, does the wireless complaint occur at the same time?

And please open a support ticket, as Nick suggested. 

Share this post


Link to post
Share on other sites
6 hours ago, Nick Bolton said:

The thread was getting off topic, that's why it was locked. The solution is a bug fix, which we're working on. There is no workaround right now I'm afraid, so you'll have to wait for the bug fix. Thanks for your patience and sorry for the delay.

Please could you make sure you raise a support ticket? https://symless.com/contact/customer-support

well im trying to submit a ticket but it asks for log URL.. where am I supposed to upload these files?

Share this post


Link to post
Share on other sites

now i see what the problem  is.. the program keeps switching the share from my main to my secondary ... now why is this happening?

Edited by mSedek

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now