SnowDrifter

Hesitation when switching screens

4 posts in this topic

I'm having about a second of hesitation when switching screens from master to slave. It seems to happen more if I move the mouse rapidly. I'm also having intermittent choppyness in mouse movement on the slave machine

Partial log file below. Can't get full log file as there are too many entries. It gets pushed off screen. Slave log file appears normal


-----------MASTER----------


[ Core ] [2017-10-09T14:19:24] DEBUG: ignored screen "CFD-SAGER" update of clipboard 1 (unchanged)

[ Core ] [2017-10-09T14:19:24] DEBUG: dropped bogus delta motion: +962,+47

[ Core ] [2017-10-09T14:19:24] INFO: switch from "CFD-Surface" to "CFD-SAGER" at 1918,586

[ Core ] [2017-10-09T14:19:24] INFO: entering screen

[ Core ] [2017-10-09T14:19:24] INFO: switch from "CFD-SAGER" to "CFD-Surface" at 0,566

[ Core ] [2017-10-09T14:19:24] INFO: leaving screen

[ Core ] [2017-10-09T14:19:24] DEBUG: open clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: close clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: ignored screen "CFD-SAGER" update of clipboard 0 (unchanged)

[ Core ] [2017-10-09T14:19:24] DEBUG: open clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: close clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: ignored screen "CFD-SAGER" update of clipboard 1 (unchanged)

[ Core ] [2017-10-09T14:19:24] DEBUG: dropped bogus delta motion: +961,+48

[ Core ] [2017-10-09T14:19:24] INFO: switch from "CFD-Surface" to "CFD-SAGER" at 1918,587

[ Core ] [2017-10-09T14:19:24] INFO: entering screen

[ Core ] [2017-10-09T14:19:24] INFO: switch from "CFD-SAGER" to "CFD-Surface" at 0,566

[ Core ] [2017-10-09T14:19:24] INFO: leaving screen

[ Core ] [2017-10-09T14:19:24] DEBUG: open clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: close clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: ignored screen "CFD-SAGER" update of clipboard 0 (unchanged)

[ Core ] [2017-10-09T14:19:24] DEBUG: open clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: close clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: ignored screen "CFD-SAGER" update of clipboard 1 (unchanged)

[ Core ] [2017-10-09T14:19:24] DEBUG: dropped bogus delta motion: +960,+48

[ Core ] [2017-10-09T14:19:24] INFO: switch from "CFD-Surface" to "CFD-SAGER" at 1918,587

[ Core ] [2017-10-09T14:19:24] INFO: entering screen

[ Core ] [2017-10-09T14:19:24] INFO: switch from "CFD-SAGER" to "CFD-Surface" at 0,566

[ Core ] [2017-10-09T14:19:24] INFO: leaving screen

[ Core ] [2017-10-09T14:19:24] DEBUG: open clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: close clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: ignored screen "CFD-SAGER" update of clipboard 0 (unchanged)

[ Core ] [2017-10-09T14:19:24] DEBUG: open clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: close clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: ignored screen "CFD-SAGER" update of clipboard 1 (unchanged)

[ Core ] [2017-10-09T14:19:24] DEBUG: dropped bogus delta motion: +960,+47

[ Core ] [2017-10-09T14:19:24] INFO: switch from "CFD-Surface" to "CFD-SAGER" at 1918,586

[ Core ] [2017-10-09T14:19:24] INFO: entering screen

[ Core ] [2017-10-09T14:19:24] INFO: switch from "CFD-SAGER" to "CFD-Surface" at 0,565

[ Core ] [2017-10-09T14:19:24] INFO: leaving screen

[ Core ] [2017-10-09T14:19:24] DEBUG: open clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: close clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: ignored screen "CFD-SAGER" update of clipboard 0 (unchanged)

[ Core ] [2017-10-09T14:19:24] DEBUG: open clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: close clipboard

[ Core ] [2017-10-09T14:19:24] DEBUG: ignored screen "CFD-SAGER" update of clipboard 1 (unchanged)

[ Core ] [2017-10-09T14:19:24] DEBUG: dropped bogus delta motion: +960,+47

[ Core ] [2017-10-09T14:19:26] INFO: switch from "CFD-Surface" to "CFD-SAGER" at 1918,463

[ Core ] [2017-10-09T14:19:26] INFO: entering screen

[ Core ] [2017-10-09T14:19:36] DEBUG: clipboard changed: lost ownership

[ Core ] [2017-10-09T14:19:36] INFO: screen "CFD-SAGER" grabbed clipboard 0 from "CFD-SAGER"

[ Core ] [2017-10-09T14:19:36] DEBUG: send grab clipboard 0 to "CFD-Surface"

[ Core ] [2017-10-09T14:19:36] INFO: screen "CFD-SAGER" grabbed clipboard 1 from "CFD-SAGER"

[ Core ] [2017-10-09T14:19:36] DEBUG: send grab clipboard 1 to "CFD-Surface"

[ Core ] [2017-10-09T14:20:08] INFO: switch from "CFD-SAGER" to "CFD-Surface" at 0,535

[ Core ] [2017-10-09T14:20:08] INFO: leaving screen

[ Core ] [2017-10-09T14:20:08] DEBUG: open clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: close clipboard

[ Core ] [2017-10-09T14:20:08] INFO: screen "CFD-SAGER" updated clipboard 0

[ Core ] [2017-10-09T14:20:08] DEBUG: open clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: close clipboard

[ Core ] [2017-10-09T14:20:08] INFO: screen "CFD-SAGER" updated clipboard 1

[ Core ] [2017-10-09T14:20:08] DEBUG: sending clipboard 0 to "CFD-Surface"

[ Core ] [2017-10-09T14:20:08] DEBUG: sent clipboard size=7382

[ Core ] [2017-10-09T14:20:08] DEBUG: sending clipboard 1 to "CFD-Surface"

[ Core ] [2017-10-09T14:20:08] DEBUG: sent clipboard size=7382

[ Core ] [2017-10-09T14:20:08] DEBUG: dropped bogus delta motion: +963,+15

[ Core ] [2017-10-09T14:20:08] INFO: switch from "CFD-Surface" to "CFD-SAGER" at 1917,555

[ Core ] [2017-10-09T14:20:08] INFO: entering screen

[ Core ] [2017-10-09T14:20:08] INFO: switch from "CFD-SAGER" to "CFD-Surface" at 0,535

[ Core ] [2017-10-09T14:20:08] INFO: leaving screen

[ Core ] [2017-10-09T14:20:08] DEBUG: open clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: close clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: ignored screen "CFD-SAGER" update of clipboard 0 (unchanged)

[ Core ] [2017-10-09T14:20:08] DEBUG: open clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: close clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: ignored screen "CFD-SAGER" update of clipboard 1 (unchanged)

[ Core ] [2017-10-09T14:20:08] DEBUG: dropped bogus delta motion: +962,+18

[ Core ] [2017-10-09T14:20:08] INFO: switch from "CFD-Surface" to "CFD-SAGER" at 1918,552

[ Core ] [2017-10-09T14:20:08] INFO: entering screen

[ Core ] [2017-10-09T14:20:08] INFO: switch from "CFD-SAGER" to "CFD-Surface" at 0,533

[ Core ] [2017-10-09T14:20:08] INFO: leaving screen

[ Core ] [2017-10-09T14:20:08] DEBUG: open clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: close clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: ignored screen "CFD-SAGER" update of clipboard 0 (unchanged)

[ Core ] [2017-10-09T14:20:08] DEBUG: open clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: close clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: ignored screen "CFD-SAGER" update of clipboard 1 (unchanged)

[ Core ] [2017-10-09T14:20:08] DEBUG: dropped bogus delta motion: +962,+12

[ Core ] [2017-10-09T14:20:08] INFO: switch from "CFD-Surface" to "CFD-SAGER" at 1918,552

[ Core ] [2017-10-09T14:20:08] INFO: entering screen

[ Core ] [2017-10-09T14:20:08] INFO: switch from "CFD-SAGER" to "CFD-Surface" at 0,533

[ Core ] [2017-10-09T14:20:08] INFO: leaving screen

[ Core ] [2017-10-09T14:20:08] DEBUG: open clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: close clipboard

[ Core ] [2017-10-09T14:20:08] DEBUG: ignored screen "CFD-SAGER" update of clipboard 0 (unchanged)

[ Core ] [2017-10-09T14:20:09] DEBUG: open clipboard

[ Core ] [2017-10-09T14:20:09] DEBUG: close clipboard

[ Core ] [2017-10-09T14:20:09] DEBUG: ignored screen "CFD-SAGER" update of clipboard 1 (unchanged)

[ Core ] [2017-10-09T14:20:09] DEBUG: dropped bogus delta motion: +960,+11

[ Core ] [2017-10-09T14:20:10] INFO: switch from "CFD-Surface" to "CFD-SAGER" at 1918,399

[ Core ] [2017-10-09T14:20:10] INFO: entering screen





----------SLAVE----------


[ Core    ] [2017-10-09T14:23:16] INFO: leaving screen
[ Core    ] [2017-10-09T14:23:16] INFO: entering screen
[ Core    ] [2017-10-09T14:23:16] INFO: leaving screen
[ Core    ] [2017-10-09T14:23:17] INFO: entering screen

Share this post


Link to post
Share on other sites

Have you found a solution to this? I have the same issue when moving from HOST -> CLIENT only.

Share this post


Link to post
Share on other sites

I have not. 

Nor have I found a way around the mouse stuttering. Hope that gets fixed as it's the reason I moved off of Synergy 1.X in the first place

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now