Tunjiy 0 Posted July 12, 2017 Share Posted July 12, 2017 I have my sever running on a Mac 10.12.5 and Client is Windows 7 PC. My PC stays in my office and I take my Mac home every night. Every day when I come in, synergy doesn't auto connect and I have to quit synergy and restart on the Mac to generate a new IP address and then re-enter the new IP address onto the client before it will connect. It really defeats the purpose of trying to have only one set of mouse and keyboard in my office. Link to post Share on other sites
Paul Suarez 107 Posted July 12, 2017 Share Posted July 12, 2017 Please provide more details about your machines (OS, 32/64 bit, Synergy version installed, connected to the network via Ethernet or Wi-Fi, specify which one is the server). Also, post a screenshot of both/all machine's Synergy interface and the Server Configuration interface on your server machine. Â Link to post Share on other sites
Tunjiy 0 Posted July 13, 2017 Author Share Posted July 13, 2017 Synergy Version: 1.8.7-stabel-9799e96 Server: Mac; Connection: WiFi and Ethernet Client: PC; Connection: WiFi Attached: Mac and PC OS version, Mac and PC Synergy Interface, Mac Server Configuration Link to post Share on other sites
Paul Suarez 107 Posted July 20, 2017 Share Posted July 20, 2017 That's an older version. Please try v1.9.0rc3. You can get it from the tagged thread below. Â Link to post Share on other sites
Tunjiy 0 Posted July 25, 2017 Author Share Posted July 25, 2017 That absolutely had the opposite affect! Now I cannot connect at all. Using both IP addresses from the server, I now get the following error on the client:  ERROR: ipc connection error, code=19 ERROR: ipc connection error, connection refused Link to post Share on other sites
Paul Suarez 107 Posted July 25, 2017 Share Posted July 25, 2017 Please post a screenshot of both machine's Synergy interface and the Server Configuration interface on your server machine. Link to post Share on other sites
Tunjiy 0 Posted July 25, 2017 Author Share Posted July 25, 2017 All I did was update the SW to 1.9 as you noted. I didn't change anything on the interface or server configuration so its identical to what i posted before... Link to post Share on other sites
Paul Suarez 107 Posted July 27, 2017 Share Posted July 27, 2017 Exactly my point @Tunjiy. There's a possibility that your machine(s) have received a different set of IP address(es) and could be the reason for this need to do a manual re-connection. Link to post Share on other sites
Tunjiy 0 Posted July 27, 2017 Author Share Posted July 27, 2017 I don't understand what you're saying here @Paul Suarez. I have manually gone in and updated the IP address on the client said to match what the server is indicating. Link to post Share on other sites
Paul Suarez 107 Posted July 28, 2017 Share Posted July 28, 2017 I see @Tunjiy. Then please  post a screenshot of both machine's Synergy interface and the Server Configuration interface on your server machine. Link to post Share on other sites
Tunjiy 0 Posted August 1, 2017 Author Share Posted August 1, 2017 (edited) This is ridiculous, not only will my client on my PC not connect anymore, I also am unable to un-install it!!! Edited August 1, 2017 by Tunjiy Link to post Share on other sites
Tunjiy 0 Posted August 3, 2017 Author Share Posted August 3, 2017 Can I get some help on this. Â My synergy has been rendered unusable for over a week now. Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now