Jump to content

Hello! 👋

These forums are now archived (read only).

Join us on Discord.

FATAL: unknown screen name


Recommended Posts

rob-laptops

i downloaded on my computer that i am going to use as a server. Did the install (including allowing access through windows firewall)

Then, i went to server config, changed the name of the server computer to Laptop-Lenovo.

I then installed synergy on my other windows 10 laptop. The windows firewall didn't pop up so i went and made some outbound rules

for some reason, on my server pc, i changed the name back to what my actual computer name is

now, when starting on my server, i always get "FATAL: unknown screen name Laptop-Lenovo"

i thought i had managed to confuse the software somehow by changing the name a lot

so i have since uninstalled on both machines and restarted

however, after reinstalling...the computer names seem to still be there

 

for symless 2.png

Edited by rob-laptops
Link to post
Share on other sites
Paul Suarez

After changing/setting a screen name for a machine, restart Synergy interface by closing it and opening it again. Check if the changes you made reflects and proceed.

Link to post
Share on other sites
rob-laptops

have done so.  makes no difference when i press start:

[2017-05-31T19:41:04] INFO: starting new process

[2017-05-31T19:41:04] INFO: activeDesktop:Default

[2017-05-31T19:41:04] ERROR: could not get session id for process id 12568

[2017-05-31T19:41:04] INFO: starting new process

[2017-05-31T19:41:04] INFO: drag and drop enabled

[2017-05-31T19:41:04] FATAL: unknown screen name `Laptop-Lenovo'

[2017-05-31T19:41:04] INFO: watchdog status: error

[2017-05-31T19:41:05] ERROR: failed to launch, error: process immediately stopped

[2017-05-31T19:41:05] INFO: backing off, wait=10s, failures=61

[2017-05-31T19:41:10] INFO: starting server

[2017-05-31T19:41:10] INFO: config file: C:/Users/Robert/AppData/Local/Temp/qt_temp.H11980

[2017-05-31T19:41:10] INFO: log level: INFO

[2017-05-31T19:41:10] INFO: service command updated

[2017-05-31T19:41:15] INFO: starting new process

[2017-05-31T19:41:15] INFO: activeDesktop:Default

[2017-05-31T19:41:15] ERROR: could not get session id for process id 12992

[2017-05-31T19:41:15] INFO: starting new process

[2017-05-31T19:41:15] INFO: drag and drop enabled

[2017-05-31T19:41:15] FATAL: unknown screen name `Laptop-Lenovo'

[2017-05-31T19:41:16] ERROR: failed to launch, error: process immediately stopped

[2017-05-31T19:41:16] INFO: backing off, wait=2s, failures=1

[2017-05-31T19:41:18] INFO: starting new process

[2017-05-31T19:41:18] INFO: activeDesktop:Default

[2017-05-31T19:41:18] ERROR: could not get session id for process id 12536

[2017-05-31T19:41:18] INFO: starting new process

[2017-05-31T19:41:18] INFO: drag and drop enabled

[2017-05-31T19:41:18] FATAL: unknown screen name `Laptop-Lenovo'

[2017-05-31T19:41:19] ERROR: failed to launch, error: process immediately stopped

[2017-05-31T19:41:19] INFO: backing off, wait=4s, failures=2

[2017-05-31T19:41:23] INFO: starting new process

[2017-05-31T19:41:23] INFO: activeDesktop:Default

[2017-05-31T19:41:23] INFO: starting new process

[2017-05-31T19:41:23] INFO: drag and drop enabled

[2017-05-31T19:41:23] FATAL: unknown screen name `Laptop-Lenovo'

[2017-05-31T19:41:24] ERROR: failed to launch, error: process immediately stopped

[2017-05-31T19:41:24] INFO: backing off, wait=6s, failures=3

[2017-05-31T19:41:30] INFO: starting new process

[2017-05-31T19:41:30] INFO: activeDesktop:Default

[2017-05-31T19:41:30] INFO: starting new process

[2017-05-31T19:41:30] INFO: drag and drop enabled

[2017-05-31T19:41:30] FATAL: unknown screen name `Laptop-Lenovo'

[2017-05-31T19:41:31] ERROR: failed to launch, error: process immediately stopped

[2017-05-31T19:41:31] INFO: backing off, wait=8s, failures=4

[2017-05-31T19:41:34] INFO: service command updated

Link to post
Share on other sites
Paul Suarez

You you want to stick with that "Laptop-Lenovo" as your client machine's screen name or? If so, please reconfigure it on the Server Configuration interface for it to recognize that screen name. If you're still unable to make it work, please post a screenshot of both machine's Synergy interface and the server's Server Configuration interface.

Link to post
Share on other sites
Paul Suarez

It wouldn't really work since they are on different networks. You are trying to connect to an IP address on 192.168.56.x network while your client is on 192.168.1.x network. If your positive that they should be on the same network, try to look for an IP address on your server's Synergy interface that starts with 192.168.1.x (where x is a number from 1-254).

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...