Jump to content

Hello! 👋

These forums are now archived (read only).

Join us on Discord.

Microsoft Visual C++ Runtime Library Runtime Error


Recommended Posts

Paul Suarez

Can you set both machine's logging level to Info and let's try to connect them again. Also, can you verify what are the two extra network adapters (those with 169.254.x.x) on your client machine for?

Link to post
Share on other sites
cubernaut
[2017-05-24T00:20:29] WARNING: failed to connect to server: Connection was refused
[2017-05-24T00:20:30] NOTE: connecting to '192.168.1.42': 192.168.1.42:24800
[2017-05-24T00:20:31] WARNING: failed to connect to server: Connection was refused
[2017-05-24T00:20:32] NOTE: connecting to '192.168.1.42': 192.168.1.42:24800
[2017-05-24T00:20:33] WARNING: failed to connect to server: Connection was refused
[2017-05-24T00:20:34] NOTE: connecting to '192.168.1.42': 192.168.1.42:24800

 

Edited by cubernaut
Link to post
Share on other sites
cubernaut
[2017-05-24T00:20:04] INFO: starting server
[2017-05-24T00:20:06] INFO: config file: C:/Users/Philip Groß/AppData/Local/Temp/Synergy.lN8600
[2017-05-24T00:20:06] INFO: log level: INFO
[2017-05-24T00:20:08] ERROR: ipc connection error, remote host closed
[2017-05-24T00:20:09] INFO: connecting to service...
[2017-05-24T00:20:09] INFO: connection established
[2017-05-24T00:20:08] DEBUG: ipc read: FFFF
[2017-05-24T00:20:08] ERROR: invalid ipc message
[2017-05-24T00:20:08] DEBUG: ipc disconnect, closing stream
[2017-05-24T00:20:08] DEBUG1: registered event type ISocketEvents::disconnected as 14
[2017-05-24T00:20:08] DEBUG: finished ipc handle data
[2017-05-24T00:20:08] DEBUG: start ipc handle data
[2017-05-24T00:20:08] DEBUG: finished ipc handle data
[2017-05-24T00:20:08] DEBUG: ipc client proxy removed, connected=0
[2017-05-24T00:20:08] DEBUG: empty command, elevate=1
[2017-05-24T00:20:08] INFO: service command updated
[2017-05-24T00:20:09] DEBUG: accepted ipc client connection
[2017-05-24T00:20:09] DEBUG: start ipc handle data
[2017-05-24T00:20:09] DEBUG: ipc read: IHEL
[2017-05-24T00:20:09] DEBUG2: readf(%1i)
[2017-05-24T00:20:09] DEBUG2: readf: read 1 byte integer: 1 (0x1)
[2017-05-24T00:20:09] DEBUG: finished ipc handle data
[2017-05-24T00:20:09] DEBUG: ipc hello, type=gui
[2017-05-24T00:20:09] INFO: watchdog status: error

As seen before...

Edited by cubernaut
Link to post
Share on other sites
cubernaut

Can somebody tell me which version of the Microsoft Visual C++ Runtime Library is used by synergy?

Maybe it would be a good idea to reinstall that?

Link to post
Share on other sites
Paul Suarez

2015 for v1.9 and 2010 for v1.8.x
Reinstalling the visual C++ runtime might not help because the original error is a crash within synergy fixed in v1.9.

Link to post
Share on other sites
  • 2 weeks later...
  • 5 months later...

I'm sorry I can't be of any help, I just stopped using Synergy because debugging took way to much time.

Version 2 has been released recently, maybe synergy support could let us try that one?

Link to post
Share on other sites

I contacted support again and got to download Synergy_v2.0.1-stable_b1240-59dd93a0-x64.

That solved my problems, so you might also give it a try.

Link to post
Share on other sites
  • 4 weeks later...
StoneAgeSkillz

Hi, were you able to get it up and running? Same problem occured to me. But the 1.8.8 was workinng fine couple of months ago and now wont start.

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...