Charles Kahn

synergy-v1.8.7 crashes on macOS 10.7.5

11 posts in this topic

Installed synergy-v1.8.7-stable-9799e96-MacOSX-x86_64.dmg and it immediately crashed so I went back to synergy-v1.8.3-stable-db9181b-MacOSX107-x86_64. Crash log below.

 

 

Process:         launchd [643]
Path:            /Applications/Synergy.app/Contents/MacOS/Synergy
Identifier:      synergy
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process:  launchd [147]

Date/Time:       2017-02-21 11:18:04.403 -0500
OS Version:      Mac OS X 10.7.5 (11G63b)
Report Version:  9

Interval Since Last Report:          504772 sec
Per-App Interval Since Last Report:  5837205 sec
Per-App Crashes Since Last Report:   5
Anonymous UUID:                      9A2D9BF4-47C3-40DD-88C5-25665B341455

Crashed Thread:  Unknown

Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00007fff5fc01028

Backtrace not available

Unknown thread crashed with X86 Thread State (64-bit):
 rax: 0x0000000000000055  rbx: 0x0000000000000000  rcx: 0x0000000000000000  rdx: 0x0000000000000000
 rdi: 0x0000000000000000  rsi: 0x0000000000000000  rbp: 0x0000000000000000  rsp: 0x0000000000000000
  r8: 0x0000000000000000   r9: 0x0000000000000000  r10: 0x0000000000000000  r11: 0x0000000000000000
 r12: 0x0000000000000000  r13: 0x0000000000000000  r14: 0x0000000000000000  r15: 0x0000000000000000
 rip: 0x00007fff5fc01028  rfl: 0x0000000000010203  cr2: 0x00007fff5fc01028
Logical CPU: 6

Binary images description not available


External Modification Summary:
 Calls made by other processes targeting this process:
   task_for_pid: 1
   thread_create: 0
   thread_set_state: 0
 Calls made by this process:
   task_for_pid: 0
   thread_create: 0
   thread_set_state: 0
 Calls made by all processes on this machine:
   task_for_pid: 2236
   thread_create: 1
   thread_set_state: 0

Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.4 GHz, 16 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: DIMM 1, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 2, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 3, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 4, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 5, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 6, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 7, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 8, 2 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: WDC WD1001FALS-41Y6A1, 1 TB
Serial ATA Device: Hitachi HDS723020BLA642, 2 TB
Serial ATA Device: Hitachi HDS723020BLA642, 2 TB
Serial ATA Device: Hitachi HDS723020BLA642, 2 TB
USB Device: MX870 series, 0x04a9  (Canon Inc.), 0x1743, 0xfd100000 / 5
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd300000 / 2
USB Device: USB Optical Mouse, 0x046d  (Logitech Inc.), 0xc05a, 0xfd330000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd320000 / 3
USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 5
FireWire Device: built-in_hub, 800mbit_speed


Share this post


Link to post
Share on other sites
On 5/9/2017 at 4:38 PM, Paul Suarez said:

Hi @Charles Kahn. We apologize for this late reply. Do you still need help with this?

I think I'm still on synergy-v1.8.3-stable-db9181b-MacOSX107-x86_64, which doesn't pass modifier keys (shift, option, command) to a TeamViewer Windows session on the Mac client from the Synergy Mac server.   But that's better than crashing.

Share this post


Link to post
Share on other sites

It did work. Additional question, do you have the SSL turned on for your server machine? Can you provide details for your client machine too?

Share this post


Link to post
Share on other sites

Client is OS 10.12.4.  SSL is off.  v1.8.8 crashes on server before SSL can be turned on.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now