Ben Raybone 0 Posted February 4, 2017 Author Share Posted February 4, 2017 Hello, when I connect my Lubuntu client to my windows PC running the server it does this:  [2017-02-04T16:32:33] NOTE: accepted client connection [2017-02-04T16:32:33] WARNING: unrecognised client name "TS3SERVER", check server config [2017-02-04T16:32:33] NOTE: disconnecting client "TS3SERVER" [2017-02-04T16:32:33] NOTE: client "TS3SERVER" has disconnected  how can I fix this? Link to post Share on other sites
Ben Raybone 0 Posted February 4, 2017 Author Share Posted February 4, 2017 Nevermind. worked it out from the server configuration thingy. Awesome Link to post Share on other sites
Vebjørn Endresen 0 Posted February 4, 2017 Share Posted February 4, 2017 i had the same problem, and used too mutch time to figure out. but what worked for me was adding the server ip adress to interface option in the settings menu. i did that both on the server and the client. Link to post Share on other sites
David Ranger 1 Posted January 23, 2018 Share Posted January 23, 2018 Old post, but it shows up at the top of Google search. I had this same problem, even after adding my new client to the server's list. Stopping & Starting the server fixed it for me. Link to post Share on other sites
Synergy Team Nick Bolton 407 Posted January 26, 2018 Synergy Team Share Posted January 26, 2018 Sorry about that. Have you raised a support ticket yet? https://symless.com/contact/customer-support Link to post Share on other sites
David Ranger 1 Posted January 26, 2018 Share Posted January 26, 2018 7 hours ago, Nick Bolton said: Sorry about that. Have you raised a support ticket yet? https://symless.com/contact/customer-support No. I solved it, but because I had landed here while Googling for the answer, I posted my solution here for anyone else who has a similar problem, Googles it, and lands at this thread. 1 Link to post Share on other sites
Nj_cygnus 0 Posted October 2, 2018 Share Posted October 2, 2018 On the client... Go to -edit -settings. Under Network section choose 'Enable Auto Config'. this will require you to install bonjour. Once you do that it should connect to the server no problem. Link to post Share on other sites
John Lussmyer 0 Posted December 27, 2020 Share Posted December 27, 2020 I seem to be hitting the same (or similar) issue. Just updated both my Synergy installations to Win 10 (server, BIGCAT) and OSX (client, MACMINI) to version 1.12.2 It all is working, EXCEPT that the server is showing this set of msgs every 5 seconds: Â [2020-12-26T16:56:07] INFO: accepted secure socket [2020-12-26T16:56:07] INFO: network encryption protocol: TLSv1.2 [2020-12-26T16:56:07] NOTE: accepted client connection [2020-12-26T16:56:07] WARNING: unrecognised client name "Server", check server config [2020-12-26T16:56:07] NOTE: disconnecting client "Server" [2020-12-26T16:56:07] NOTE: client "Server" has disconnected Auto config works, and I've saved the server Synergy configuration, and there is no mention of a client named "Server". Link to post Share on other sites
CNLohr 0 Posted January 13, 2021 Share Posted January 13, 2021 (edited) Can someone please post here how to do this without Bonjour? Again, this is at the top of google, and countless people are landing here. And I simply cannot figure out how to do this correctly and I'd rather not write an sgc from scratch. One way I found to do it (this has got to be incorrect) but, you can: 0) Start Synergy Client on remote computer. 1) Start Synergy Server on the server. 2) Select Client Mode on the client. 3) Select Server Mode on the server. 4) Type in your server's address on the client. 5) Click "Configure Server..." on the server. 6) Drag the screen in the upper right onto a cell in the window. 7) Configure that screen to use some arbitrary friendly name, then add an alias which is the client's computer name. You must type it in then click Add, then you can say OK. Then it seems to work. Again, this feels super jankey that you need to have a separate friendly name for the remote client's name... So, surely this is wrong. Edited January 13, 2021 by CNLohr Link to post Share on other sites
Steve Bennett 0 Posted January 28, 2021 Share Posted January 28, 2021 First - hooray, the tip above finally got Synergy working for me. To clarify the important bit: - the name of the client doesn't matter - adding the client's real name as an *alias* is what matters. Â Pretty surprised by just how crappy and flakey this software is for $29 USD. It obviously gets very little maintenance or development, but must be making a ton of money. Link to post Share on other sites
SuperVeetz 0 Posted February 3, 2021 Share Posted February 3, 2021 What did the trick for me was clicking on "Configure Server" button and under "Screens and links" tab, add a new screen (drag and drop top right icon) and ensure the "Screen Name" is the same name that you're other machines / clients are using. Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now